1958 Chevy Delray Elite+ EZ Air Ride Suspension Kit

1958 Chevy Delray Elite+ EZ Air Ride Suspension Kit

Your Price: $2,499.95
Part Number:EP-58-Delray
- or -

Elite+

Our new Elite+ is the ultimate in innovation when it comes to air ride for your classic. We have listened to each and every customer's input on what they want out of an air ride set up. So, we delivered.

Imagine...controlling the speed UP on your air ride with a simple twist of a valve on your tank? As well as controlling the speed DOWN with a turn of a muffler on your manifold. The new Elite+ will allow you to simply time your air ride like you would time your ignition.

The new Pinch Grip™ Gauge Panel was designed with direct customer input. The Elite+ cuts the cord of the switchbox, incorporates the gauge and controls into one elegant control center that makes using it as EZ (and fun) as putting your kid brother in a Vulcan nerve pinch.

This Kit Includes:

7 Gallon Tank

We custom designed this tank to fit nicely in-between the frame rails of most trucks. For those who will not be mounting this tank we offer specially designed brackets that act as feet so the tank may sit comfortably in your trunk. This tank comes with 5 ports total - (2) 3/8" ports on the ends, (2) 1/2" ports on the opposing faces, and (1) 1/4" port for the drain on the bottom.

A common misconception with an aluminum tank is that users do not have to worry about rust. As it is true aluminum does not rust, condensation will occur in any tank, getting into your air lines and valves causing rust and contaminating other major components. Our tank is made out of steel and has a coating inside and out for years of corrosion protection. This tank will last as long as you let it, if properly taken care of.

Weight: 22 pounds
Tank length- 29" (overall length 33" with side flanges)
Diameter- 8"

Dual Viair 444C Chrome Compressors

All 444C compressors feature a head assembly that includes a newly-developed, patents pending intercooler head. Additionally, they are equipped with a stainless steel braided leader hose with inline check valve assembly that serves to protect the compressor by eliminating the possibility of high amperage restarts.

Pinch Grip™ Gauge Panel

This gauge panel features our exclusive EZ Air Ride digital gauge with built-in pressure sensors along with side-mounted switches to keep a super-clean-shaven look. These billet gauge panels were designed to give you that classic, uncluttered look when mounting them in your vehicle.

EZ Color-Connect Cable

We couldn't imagine upselling you on a necessary piece of the puzzle. Here is a genuine, 18-gauge o2-free, jacketed 9-wire EZ harness. This is a true Color Connect Cable...Connect the color dots. That's all folks!

EZ Air Ride Manifold Valves

These manifold valves are an EZ Air Ride exclusive. They are Made In The USA. Each valve block controls both the raise and drop of one end of your vehicle, making your installation much cleaner. Gone are the days of having a complex setup for individual control at each corner. These valves give you true 4-Corner Control (4CC). Included with these valves are (4) 1/8" NPT slowdown mufflers/silencers that give you the ability to fine tune the speed and exhaust volume of the drop with the turn of a knob. You also get (2) EZ Flow Controls to control the speed of the raise.

These aluminum valves feature:

  • (2) 1/8" NPT outlet ports for your gauges
  • (2) 3/8" NPT outlet ports for your bags
  • (2) 1/8" NPT outlet ports for silencers/mufflers and
  • (1) 3/8" NPT inlet port.

Elite Fitting Pack

This pack comes with all of the EZ Air Ride exclusive DOT fittings you need to assemble an EZ Air Ride Elite+ kit.

58-64 Front Air Bag Brackets

Our SET IT AND FORGET IT line of brackets were designed with you in mind. We have custom made these brackets to fit your specific year vehicle. They are 100% bolt on and require absolutely no welding. Just bolt these in place of your factory coils and you re done. It s as simple as that; just SET IT AND FORGET IT.

Each and every bracket is powder coated, labeled and includes all necessary hardware.

58-64 Rear Air Bag Brackets

Our SET IT AND FORGET IT line of brackets were designed with you in mind. We have custom-made these brackets to fit your specific year vehicle. They are 100% bolt on and require absolutely no welding. Just bolt these in place of your factory coils and you re done. It s as simple as that; just SET IT AND FORGET IT.

Each and every bracket is powder coated, labeled and includes all necessary hardware.

Tank Brackets

These brackets have been designed to fit our exclusive air tanks, making mounting easy and headache free.

58-64 Shock Relocators & Shocks

Shock absorbers are what actually control the movement of the vehicle's suspension under rough driving conditions. Properly set-up shocks allow for precise and predictable control over your vehicle; whether heavy accelerating, braking, or cornering. In air suspension systems, shocks can also be important for other reasons. Air is compressible, and air-springs are essentially flexible pressure vessels, the spring rates vary. This variance is dependent on the height of the spring and the pressure inside. In most cases, this variability, along with the inability of the air-spring to damp shock, causes the vehicle to bounce continuously after hitting an irregularity in the road. Bouncing could unload the tires and make handling difficult. Shocks damp potential bouncing and allow the suspension to normalize very quickly keeping the contact patch of the tire pressed firmly against the road.

Note: We have learned from many customers and their beloved X-Frames, that some were built in California, some in Maryland, Missouri and even Canada. Depending on which plant your car came from, you may have a fully-boxed frame that may require the shock relocator to be welded on or strategically bolted on (i.e- drill bolt hole on the face, drill a larger hole on the backside with a holesaw; allowing a deep socket to tighten the nut). Other companies will give you self-tapping bolts that could leave you screwed.

AirLift Dominators

Gen IV Dominator Series D2500; Single; 1/2" port; Air Lift Performance is proud to announce the second model from the brand new Dominator series line of air springs: the Dominator D2500! Featuring an unprecedented maximum restrained pressure of 600 psi, 7.7" usable stroke, and a load range of 349-3055 lbs.; this bad boy will give you the performance you crave. With more lift, a softer, smoother ride, and the lowest price in the industry: you can't go wrong with the new Dominator D2500!

3/8" DOT Air Line

All the 3/8" DOT air line that you'll need to plumb your manifolds/tank to the bags.

1/4" DOT Air Line

All the 1/4" DOT air line you'll need to plumb your new digital gauge to your manifolds.

EZ Air Ride Survival Kit

Don't let the other guys charge you $50-$80 for this kit, we include it for free!

  • (2) Relays with color-matched, plug-in harnesses
  • (2) 40-amp Fuses w/ holders
  • 8-gauge power wire (O2 Free/Not CCA)
  • EZ Air Crocodile Cutter/tubing cutter
  • Thread Locker/Loctite
  • Cable Ties
  • Flashlight
  • Stickers
  • EZ Air Ride Coozie
  • Shop Rag

Positive Battery Terminal

This complimentary EZ Air positive battery terminal is a brushed nickel, anti-corrosive unit with (2) 8-gauge ports for seamless integration of your 8-gauge power wires for your compressors.

EZ Air Spare Air Kit

This EZ Air Ride exclusive accessory is priceless in the world of air ride. With 7 gallons of air capacity you can fill up your tires, spray off dust or water, run an air tool or even honk a train horn with your on board air.

More importantly, you'll use this for your initial fill because the first fill is the worst fill i.e. you're not just filling a 7-gallon tank, you're filling the entire system.

Our Spare Air kit also allows you to fill up your air tank with the compressor in your garage or at a gas station. EZ Air Ride suspension kits are the first and only to now feature on board air as a no-cost-to-you luxury that comes standard in every kit. Make your air ride kit more universal with EZ Air Ride's all new Spare Air.

Included in the kit:

  • Brass Tee
  • JAtech Stainless Steel/Aluminum, Safety Series Quick Connect
  • 25' Coil Air Hose
  • Quick Connect Female Coupler
  • Brass Air Chuck
  • (1) Schrader Valve w/ cap.